Jony Jib Two Line

The JonyJib2 is expandable from 9' (2 sections) to 18' (5 sections) in 3' increments. (These are height measurements. For reach subtract 5' from height.) Each extension tube is 4' long giving a 1' overlap between sections. Since each section slides out, pulled from the previous sections, you may store unused sections in the tail as ballast weight. This lightens your counterweight demand. You can buy as few, or as many sections as you need. Then purchase more sections when you need them.

The pivot point is pre-drilled to mount an optional Anton Bauer Gold Mount plate kit that can feed an optional 12 volt power distribution box at the tail. The distribution box can feed 12 volts power to the motorized pan & tilt head, zoom & focus controls, the monitor and the camera. The pivot point is also pre-drilled to mount the included LCD monitor mounting bracket or an 'optional' monitor platform for 5-9" CRT monitors. The adjustable camera platform leveling cable is also anchored at the pivot point.

The camera platform is designed to over-sling or under-sling an optional motorized pan & tilt head without any changes. Just attach it either way and there's 360 degree pan & tilt clearance.

The main arm and extension sections are fabricated aluminum extrusions while the pivot point, camera platform and rear control center are steel. All are powder coated for a years of reliable use.

Choose from one of these great JonyJib 2 Kits:

Back To Top