SE-500 Video SwitcherThe Datavideo SE-500 is a compact and light weight, four channel analog input, digital processing video switcher with S-Video (Y/C) and Composite Video inputs. In addition to S-Video and Composite Video, the SE-500 also provides Component Y:U:V) output. The SE-500 is ideal for applications within Education, Seminars, Small Studios,Clubs,Pubs and many more. The SE-500 uniquely display all four input sources via a single quad output,including a superimposed tally indicator on each input, meaning you only need two video monitors - one for all four inputs, one for output. The input display will automatically change to preview the next transition.
Features include Dissolve, Fade, Wipes, Splits, PiP and Color Processor. Channels are internally synched via a built-in dual channel TBC 4:2:2 frame synchronizer.
The SE-500 can be manually operated or controlled via RS-232 & Midi Interface. Using Datavideo DAC-6 (DV to Composite, Y/ C & Component Y:U:V converter) VP-314 (DV Repeater), and 30 or 60 ft DV cable, it allows connection of DV equipment such as DV camcorders or tape machines up to 160 meters away.
SE-500 Features:Video Connections
- Input: 4x Composite and S-Video
- Output: 2x Composite and 1x S-Video
Audio Connections
- Input: 2x unbalanced RCA and ¼” mic
- Output: 2x unbalanced RCA
Control Connections
- RS-232 remote control interface
Power
- 12V 1.5A DC operation 110/220 power supply and cord included
Special Features
- Monitor output: preview may be displayed as PIP or Quad Preview
- No genlock required: frame syncs and TBC built in for each active source
- Works with TB-5 tally box to provide tally output
- With the included breakout cable, one composite output and one S-Video output can be combined and converted into a component output
- Built in audio mixer with two microphone channels and one auxiliary video source input
- Picture-In-Picture
- Color processor for video correction
- Digital processor – high image quality
- Digital effects – spilt, PIP, wipe, fade and quad display effect
- Illuminated control buttons
- 5-pin MIDI control interface
- Easy tilting with Datavideo CG-100 character generator
- Headphone monitor with volume control
- Available in NTSC or PAL video standards (not a dual standard device)
Dimensions:
- Length 10.3 in Length 262 mm
- Width 15.7 in Width 400 mm
- Height 3.3 in Height 84 mm
- Weight 4.4 lbs Weight 2 kg
Included Accessories
- One 4 ft (1.22m) Y/C (S-Video) cable
- Two male BNC to male RCA cables
- Two female RCA to male BNC adapters
- One stereo RCA cable
- One YUV break-out cable
- 12V 1.5A DC operation 110/220 power supply and cord included
SE-500 Frequently Asked QuestionsQ: Does the "Quad Display" show all sources in real time or at a low frame rate?A: Yes, the Quad Display is real time, as well as Preview. All of the SE-500 video outputs are compliant with the NTSC and/or PAL video standards.
Q: What are the sizes of the Picture-in-Picture windows?
A: The small PIP window has a width of 243 pixels and a height of 162 pixels. The large PIP window has a width of 288 pixels and a height of 194 pixels.
Q: Does the SE-500 have a "take" or "auto take" button?
A: No, all SE-500 transitions are activated with the T-bar. If your application requires a take button, please take a look at our SE-800AV.
Q: Is the SE-500 a dual standard unit which will work in NTSC or PAL Video formats?
A: No, the SE-500 is available in either NTSC or PAL only.
Q: Can I connect the DB-15 tally outputs from the SE-500 to the ITC-100 to send tally to my intercom packs?
A: Yes, the ITC-100 will accept the tally signal directly from the SE-500.
Q: The buttons on my SE-500 are locked up. How can I fix this?
A: Make sure that the correct power adapter is connected to your SE-500 (12V 1.5A). Unplug the power from your SE-500 and plug it back in after a few seconds to see if the issue clears. If not, please contact technical support here.
Q: Why is the output from my SE-500 in black and white?
A: This can sometimes be caused by a defective S-video or composite cable. If the video input preview is in color, check the output cables from your SE-500 by replacing it with another cable.
Q: I want to make my own tally lights for the SE-500. What are the specifications?
The power can be DC 5V to 24V DC. The line current limitation is MAXIMUM 15mA. The resistor value affects the LED's brightness, the larger the value (resistance), the lower the brightness.
Q: Can I use the Datavideo ITC-100 Intercom with the SE-500?
A: Yes, the ITC-100 Intercom can be used with the SE-500. The tally output from the SE-500 can be connected to the ITC-100 to activate the tally lights on the ITC belt packs.
Q: How much noise does the SE-500 generate?
A: None! The SE-500 is a solid state unit with minimal heat generation, so internal fans are not needed to keep the unit cool and the buttons are made of sound absorbing rubber.
Q: Which Datavideo Character Generator is recommended for the SE-500?
A: We recommend the CG-100 Character Generator.
Q: Can the SE-500 be controlled remotely?
A: Yes, the SE-500 Switcher can be controlled via RS-232 or MIDI. The command protocol can be on the SE-500 page. Datavideo also has an Ethernet-based remote controller (RMC-150) for the SE-500.
Q: Can I disable the effect preview in the quad preview monitor when I´m switching sources with the T-Bar?
A: No, the quad preview output is programmed to show all four input sources and preview any switched effects.