JonyJib Pro 09

• (1) One JonyJib Pro Camera Crane Jib Arm 9 feet (height)
• (1) One JonyJib Pro Mitchell Mounting Hub
• (1) One JonyJib Pro Rear Control Center & Weight Bar
• (1) One JonyJib2 Accessory Pack
• (1) One JonyJib LCD Monitor Mount
• (1) One JonyJib Pro Auxillary Weight Bar

The JonyJibPro 09 is a 2 section jib giving 9 feet of camera height. It includes 2 mast sections, camera platform, leveling cable, pivot bracket, Mitchell mounting hub and rear control and weight mounting center. This jib has 2 selectable fulcrum points.

NOTE: The tripod & car shown above are NOT included with purchase.

	JonyJib Pro Mitchell Mounting Hub The JonyJib Pro mounts to a Mitchell mount style tripod via this 150mm Mitchell mounting hub. A 2.75" nut holds the hub in place on the Mitchell mount. The weight of the jib's pivot bracket attaches to an aluminum disc that glides on an oil impregnated bearing. This gives the JonyJib perfect drag for smooth arcing moves. The friction knob allows you to brake the jib or apply additional drag as needed.
	JonyJib Pro Rear Control Center & Weight Bar This unit provides a horizontal bar to mount your controls upon. It also provides a horizontal primary weight bar for your counterweights. We recommend a combination of 25, 10, 5, and 2.5 pound cast iron plate weights with at least a 1" mounting hole. This assembly swivels further absorbing unwanted vibration or movement from the operator.
	JonyJib2 Accessory Pack The JonyJib Pro comes with convenience items to make setup and tear down quicker. We include a bubble level, hex screwdriver and a spacer kit. This pack also includes an owner's manual and a DVD featuring safety tips, setup instructions and basic moves primer.
	JonyJib LCD Monitor Mount You can easily mount your LCD monitor with this articulating mount. One end attaches to the JonyJib pivot bracket while the other provides a 1/4" threaded knob to screw into the bottom or top of your monitor. For 4" to 12" LCD monitors with 1/4" - 20 mounting threads.
	JonyJib Pro Auxillary Weight Bar This unit provides an additional horizontal bar for additional counterweights. It mounts slightly forward of the Primary Weight Bar. We recommend a combination of 25, 10, 5, and 2.5 pound cast iron plate weights with at least a 1" mounting hole.