V-440HD Video/Mix live Switcher - (EDI/V-440HD)
Details * Configuration * Specifications * FAQ * Downloads
:: DETAILS
Mix multi format signal
Capable to mix SD video, HD video and RGB signal from computers. NTSC or PAL of SD video, 1080i or 720p of HD video, upto SXGA resolution of RGB signal can be input.
Output multi format signalSelectable output format.
1080i or 720p for HDTV and RGB for computer display.
Seamless mixing/switching
Thanks to the built-in up converter and scan converter, totally seamless mixing or switching of different format signal is possible without any external device or any complicated operation.
Simple operation of EffectsExremely simple and intuitive operation of effects.
Turning dial to set Key level or PinP size. Joystick to adjust PinP position. Dial to set time of auto transition effects.
Multiple units connectable
With through output of video signal and MIDI connection, multiple units can be cascaded for wide image (32:9 etc) output to multiple screens.
Remote controllable
V-LINK make this remote controlable from external Roland/Edirol music instruments. Remote control from computer connected via RS-232C is also possible.
:: CONFIGURATION
Back To Top
:: SPECIFICATIONS
|
Video Format
|
SD : NTSC or PAL (CVBS?S(Y/C)
HD : 1080/59.94i/50i
SMPTE274M(Y:Pb:Pr TriLevel Sync)
720/59.94p/50p
SMPTE296M(Y:Pb:Pr TriLevel Sync)
RGB : 640x480/60/75, 800x600/60/75,
1024x768/60/75,1280x768/60/75, 1280x1024/60
(RGB VH:positive/negative logic)
*VESA DMT Version 1.0 Revision 10 conform
|
|
Video Sampling
|
SD : 4:2:2(Y:B-Y:R-Y), 8-bit, 13.5 MHz(BT.601)
HD : 4:4:4(Y:Cb:Cr), 8-bit, 74.1758 MHz/74.25 MHz
RGB : 4:4:4(R:G:B), 8-bit, 25 MHz to 110 MHz
|
|
Video Transition
|
Cut, Dissolve(MIX), Wipe : 6Patterns, Reverse, SoftEdge, OneWay
|
|
Composition FX
|
Picture in Picture, Chroma Key (Blue/Green), Luminance Key(White/Black)
Picture in Picture with Zoom/Pan (HD/RGB side only)
|
|
Multi-Screen Presentation
|
Screen Setup : 2 screens x 1 line, 3 screens x 1 line, 2 screens x 2 lines, 3 screens x 2 lines
|
|
Synchronization of Multiple Units by MIDI
|
Control the slave unit(s) from master unit
|
|
Master Fade
|
0 to 4 seconds Black or White
|
|
SD Input
|
S-Video (Y/C) Preferential x 4 :-
4-pin mini DIN type
(Y: 1.0 Vp-p, C: 0.286 Vp-p, 75 ohms)
Video (composite) x 4 :-
BNC type (1.0 Vp-p, 75 ohms)
|
|
HD/RGB Input
|
BNC Type x 4
HD : Y/Pb/Pr (1.0Vp-p, 75O, TriLevel Sync)
RGB : R/G/B (0.7Vp-p, 75O), H (5VTTL), V (5VTTL)
D-SUB 15pin Shrink Type for HD/RGB x 4
*For In or ThruOut use, select BNC Type or D-sub
Type
|
|
SD Output
|
PGM S-Video (Y/C):-
4-pin mini DIN type
(Y: 1.0 Vp-p, C: 0.286 Vp-p, 75 ohms)
PGM Video (composite) :-
BNC type (1.0 Vp-p, 75 ohms)
Preview :-
BNC type (1.0 Vp-p, 75 ohms), OSD Menu Output
|
|
HD Output
|
PGM Component HD:-
BNC Type x2 (1.0Vp-p, 75 ohms, TriLevel Sync)
Preview Component HD :-
BNC type (1.0 Vp-p, 75 ohms, TriLevel Sync)
OSD Menu Output (display On/Off is selectable)
|
|
RGB Output
|
PGM RGB :-
D-sub 15pin Shrink Type x2 (0.7Vp-p, 75 ohms,
5VTTL Sync)
Preview RGB :-
D-sub 15pin Shrink type (0.7 Vp-p, 75 ohms, 5VTTL
Sync)
OSD Menu Output (display On/Off is selectable)
|
|
Remote Control Interfaces
|
MIDI 5pin DIN Type (In, Out/Thru), RS-232C D-sub 9pin
|
|
TALLY Output
|
TALLY Output
|
|
Power Supply
|
AC 117 V, AC 230 V, AC 240 V (50/60 Hz), AC 220 V (60 Hz)
|
|
Power Consumption
|
50W
|
|
Dimensions
|
482(W) x 308(D) x 130(H)mm or 19(W) x 12-1/8(D) x 5-1/8(H) inch *EIA-7U Rack Mount Size
|
|
Weight
|
6.8 kg or 15 lbs.
|
|
Accessories
|
Owner's Manual, Power Cord
|
| In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice.
|
Back To Top
:: FAQ
Can I output HD and SD video mixed by V-440HD as an SD signal?
No. Mixed video is output as HD or RGB signal.
When inputting HD/RGB video to V-440HD, can I specify the format to HD or RGB per channel?
Yes. V-440HD allows you to select HD or RGB for each channel when inputting video.
Can I display the menu screen of V-440HD on the monitor connected to the HD OUT terminal or RGB OUT terminal?
While pressing and holding the SHIFT button, press the MENU button to display the menu on the monitor connected to the HD OUT or HD PREVIEW OUT and RGB OUT or RGB PREVIEW OUT terminals.
For the HD/RGB IN input of V-440HD, can I input videos from the analog component (BNC) terminal and Dsub terminal of the same input channel simultaneously and then switch them for output?
No. You cannot input videos from the analog component (BNC) terminal and Dsub terminal of the same input channel simultaneously. If you do this, the video will be unstable.
Reference:
* You can use a terminal to which video is not input to loop through the input video signal and monitor it.
* How to loop through video signal
Input a video single to the RGB terminal or D-Sub terminal of the HD/RGB IN input, and connect a monitor to the unused terminal. The input video signal is shown on the monitor.
In the multi-screen output screen of V-440HD, only the center portion of the input video is displayed.
If you select 2×1, 3×1, or 3×2 in Multi Screen Type, the top and bottom portions of the input video are not displayed on the output monitor and only the center portion is displayed.
This is because selecting 2×1, 3×1, or 3×2 causes the aspect ratio of the output video to change. For example, while the output format with 16:9 of the aspect ratio is selected, selecting 2×1 in Multi Screen Type causes horizontally long video with the aspect ratio 32:9 is displayed over the two monitors. In this case, the top and bottom portions of the video are truncated.
Can I remotely control V-440HD from an external device?
V-440HD supports V-LINK, RS-232C, and MIDI, and can be remotely controlled by an external device.
Is V-440HD equipped with a frame synchronizer?
Yes, V-440HD is equipped with a frame synchronizer on each of buses A to D.
Is V-440HD compliant with RoHS (Restriction of Hazardous Substances Directive)?
Yes, V-440HD is RoHS-compliant.
When inputting HD/RGB video to V-440HD, can I select the Dsub terminal (15-pin) and BNC terminal separately for each channel?
Yes. You can select one of the terminals for each channel.
Back To Top
:: DOWNLOADS
Call us at (702) 233-0076 or e-mail us for specs, pricing or for more information. |
